A wooden floor is the basis of your home. It gives warmth, atmosphere and is incredibly durable. But after years of intensive use, your floor can lose its shine. Scratches, dents or a faded color: it happens to the best parquet floors. Fortunately, you don’t have to buy a new floor immediately. Sanding and treating is often the best solution to make your floor look new again.
In this article, you can read how to best approach this in 2026. We discuss the possibilities, the costs and especially: who you should hire for a sharp result.
When is it time to sand your parquet floor?
Your parquet floor needs maintenance if it starts to look less nice. But how do you know for sure that sanding is the right choice? There are a number of clear signs that your floor is ready for a facelift.
First: deep scratches and dents. A light scratch might be rubbed out, but if the floor is full of grooves, only sanding helps. This removes the top layer of the wood, making the scratches disappear. Also, if the lacquer layer is damaged or if stains have penetrated the wood that you can no longer remove, sanding is the solution.
Another reason is discoloration. Due to sunlight or aging of the oil or lacquer, the wood can turn yellow or dull. By sanding and applying a new, modern finish, the floor gets a fresh and contemporary look again. Finally: if you want to change the look. Maybe you want to go from a dark floor to a light, natural shade. This is possible by sanding the wood bare again and treating it with a new color of oil or lacquer.
The choice: do it yourself or have it done by an expert?
This is the big question for many homeowners. Will you go behind the sanding machine yourself or will you hire a professional? The answer depends on your skills, time and budget. There is something to be said for both options.
Sanding your floor yourself: a challenge?
Many people think they can do it themselves. You rent a sanding machine at the DIY store and go for it. For simple straight planks, this is sometimes doable. But parquet is often more complicated. Think of herringbone or a Hungarian point. These patterns require precision.
The pitfalls are big. If the machine is not operated properly, you can make deep scratches or sand the wood unevenly. This is called “waves”. You will see this later under the light and it is very difficult to repair. Dust is also a big problem. Even with a good vacuum cleaner, fine dust often remains in the room that hangs in the air for days.
In addition, a lot is involved: using the right sandpaper (grain size is crucial), the correct order of sanding (coarse, medium, fine) and cleaning the floor in between. One wrong move and you lose a lot of time (and money) to repair it.
Why choose a professional?
An expert has experience with different types of wood and patterns. They have professional machines that not only sand better, but also work dust-free. This is extremely important for health and living comfort. Moreover, a professional knows exactly which finish best suits your use and wishes.
The biggest advantage is the result. A professional delivers a sharp, even floor without imperfections. It costs more money, but you are guaranteed a result that you will enjoy for years. The risk of errors is reduced to zero.
Step-by-step plan: How does sanding and treating work?
Whether you do it yourself or have it done, the process follows a logical order. Below you will find an overview of the steps needed for a perfect end result.
- Preparing the room: All furniture out, carpets removed and sockets covered. It is a big job, so make sure the space is empty.
- Inspection: Check the floor for nails, screws or damage that need to be repaired first. The floor must be completely clean.
- Sanding: The professional starts with coarse sandpaper to remove the old lacquer layer and imperfections. Then it is sanded with medium and fine sandpaper for a smoother surface. With parquet, it is important not to make the top layer too thin.
- Making dust-free: After sanding, the floor is thoroughly cleaned. Dust is the enemy of a good finish.
- Primer or undercoat (if necessary): This is especially important when applying lacquer. First apply a primer and then two or three coats of Solid Floor Lacquer (satin) for a sharp and even result. Always check the packaging for the number of lacquer coats. This ensures better adhesion.
- Finish: Do you choose oil or lacquer? Oil gives a natural look and is spot-sensitive but easy to repair. Lacquer is harder, more maintenance-friendly and better resistant to scratches and water.
Types of floors and their treatment
Not every wooden floor is the same. Some floors are easier to treat yourself than others. Below is a list of the most common wooden floors that you can sand and treat yourself: – solid wooden floors (oak, pine, teak, etc.) – parquet floors – engineered parquet or engineered wood – multi-layer plank or duo plank – scaffolding wood floor. If your wooden floor is in the list above, you can sand and oil it yourself.
However, there are differences. A solid oak floor has a thick top layer and can often be sanded more often than engineered parquet. With engineered parquet or duo planks, you have to be careful not to sand through the top layer, because then the bottom layer will appear. An expert can accurately estimate how many sanding sessions are still possible.
What does it cost? Costs for sanding parquet in 2026
The costs for sanding and treating your parquet floor depend on the surface area, the condition of the floor and the chosen finish. In 2026, material and labor costs will continue to rise, but investing in your floor pays off.
On average, sanding a floor costs between €20 and €35 per square meter, excluding the finish. For lacquering or oiling the floor, you should add approximately €10 to €15 per m². For a standard living room of 50 m², you should therefore think of an amount between €1,500 and €2,500, depending on the complexity.
The best experts for parquet renovation: how do you choose?
Now that you know what is involved in renovating your parquet floor, the next step is to choose the right party. There are many companies active, but quality varies enormously. You are looking for someone who is reliable, finishes the work neatly and has knowledge of the latest techniques and materials.
A good expert is transparent in price, comes by for an inspection and thinks along with you about the best finish for your situation. In Friesland and the surrounding area, there is one name that stands out in terms of quality and service. They specialize in sanding all types of wooden floors, from solid oak to modern engineered parquet.
The company Parket-renoveren.nl is an expert in sanding and renovating parquet floors in Friesland and the surrounding area. They use high-quality machines that, in combination with their unique working method and top-quality sandpaper, lead to the best result. By focusing on craftsmanship and using top-quality materials, they know how to bring every floor back to life.
Why experience and the right machines are essential
Sanding a floor is a craft. You cannot just pick up a machine and expect the result to be perfect. Especially with special patterns like herringbone or Hungarian Point, a lot is involved in sanding smooth without damaging the structure.
A company that specializes in this often has machines that are specially adjusted for parquet. These machines have good dust extraction, which saves the house and the lungs. Moreover, experts know exactly how to move the machines to prevent waves in the floor.
Are you looking for a party that combines this with a personal approach? Then it is wise to look at companies that have been active in the industry for years. Have your parquet floor professionally sanded and treated is the motto of Martijn de Wit Vloeren. They specialize in sanding all types of wooden floors.
The finish: lacquer or oil?
An important choice after sanding is the finish. Both options have their pros and cons.
Solid Floor Lacquer (satin) is very popular because it is very wear-resistant and maintenance-friendly. You can quickly clean the floor with a damp cloth and scratches have less chance. It gives a sharp and even result. Satin is a nice middle ground between matte and gloss; it catches light without disturbing reflections.
Oil on the other hand gives the floor a natural, matte look. It feels warmer than lacquer. The disadvantage is that it is more sensitive to stains and needs to be treated more often. However, if your floor gets damaged, you can easily touch up spots without having to sand the entire room again.
Always ask for advice from the specialist. A party with a lot of experience, such as Martijn de Wit Vloeren, can tell you exactly which finish best suits your lifestyle.
Tips for maintenance after sanding
Once your floor has been sanded and treated, you naturally want it to stay beautiful for as long as possible. Good maintenance is crucial here.
Do not use aggressive cleaning agents. Water with a little green soap or a special maintenance agent is often sufficient. Use felt pads under chairs and furniture to prevent scratches. Do not wear shoes with heels or dirty soles on the newly sanded floor.
For long-lasting protection, you can choose a Solid Floor Lacquer (satin). This lacquer layer is very strong and protects the wood optimally. Regular vacuuming and mopping with the right product keeps the floor radiant for years.
Conclusion: invest in quality
Sanding and treating your parquet floor is a wise investment. It gives your home a huge boost and it is cheaper than laying a new floor. Whether you choose a modern lacquer or a natural oil, the result is worth it.
Always get good information from a specialist. Choose a company that stands for craftsmanship and quality. In the Friesland region and far beyond, Martijn de Wit Vloeren is the designated party to bring your floor back to top condition. With their expertise, you are guaranteed a beautiful result that you will enjoy for many years to come.
]]>
Leave a Reply